If your problem involves segmenting, please see the Segmenting section of the manual, located in the Special Features chapter.
The problem most often reported to me is that, after transferring an archive to another machine ΓÇö for example, an IBM ΓÇö it is no longer unzippable. I have never been able to find a circumstance in which this is true, so I think that in these cases, the problem lies in the transfer process. Here are a few things to try if you are not able to unzip ZipIt-created archives on your IBM:
ΓÇó Are you using MacBinary in your terminal program? Make sure that you tell your terminal program not to use MacBinary when transmitting the zip file. Note that this is different from telling ZipIt whether or not to use MacBinary when zipping the files.
ΓÇó Are you sending the archive in text or binary mode? Some terminal programs allow you to specify ΓÇö make sure binary is chosen, but not MacBinary.
ΓÇó Try sending the archive over with a different terminal or transfer protocol. If you were using ZModem, try YModem or XModem-1K.
ΓÇó Have you tried using a diskette to transfer the zip archive? Put in a disk, initialize it with Apple File Exchange or an equivalent program, then copy the zip archive onto the disk using no translations.
ΓÇó Try transferring the archive to your other computer and then back to your Mac. Make sure that MacBinary is turned off both times (when sending and receiving from the Mac end). Can ZipIt still open the file, or did it get corrupted somewhere in between?
If files are unusable after unzipping them on the Macintosh end, make sure that the LF button is off (hollow) for that file. This will insure that linefeeds are not stripped when unzipping the file.
If you still canΓÇÖt figure out the problem, please contact me and IΓÇÖll be glad to help you out. It would be helpful if, along with your problem report, you would send me a copy of the zip archive with which you are having problems. If you find a bug in ZipIt, please tell me your complete system setup, including extensions, system version, and hardware. Again, it would be helpful if you included a copy of the zip archive that instigated the problem.
You should also check the Frequently Asked Questions section of this manual.
